Saturday, March 31, 2012

Legalize Marijuana...

Mock up

Need to fill the drain caps and make spacers for the wheel

Almost there

4" over, forking by frank tubes.
Shaved lowers.
One piece high rise risers.
Narrow drag bars.
Fx brow and light.
21" 70s dirtbike drum.

I really enjoy building clean stock front ends

Pluging a hole

I bent a penny over a tube with the same radius and wedged it in with a wooden chock. Cant fit a welding spoon, use a penny

Agilite IPC (Injured Personnel Carrier)

Motorcycle "Gang" Movie Trailer 1950's

Freddie Spencer Explains Motorcycle Racing 3/3 [1985]

Wednesday, March 28, 2012

Painted the pipe, polished the levers, fixed the fender mount, painted the front end and bars, greased the wheel bearings and stem

Some progress

Wiring is done and I have spark, filter is cleaned and the cover is painted. Funny considering the 50cc motor is 1/24th the size of my shovelhead

Tuesday, March 27, 2012

Monday, March 26, 2012

Aprilia RS125 engined YSR

M1GP Series Racing

One hour freshen up

From seized to ready to run. Need to go through the carb and make an oil pump block off plate since I'm gonna run premix to save a pound and some parasitic drag. Once its running and together I'll bead blast it, paint and polish

Sunday, March 25, 2012

Ysr50 build

As if i dont have enough junk.

The wheels roll now. Both brakes were seized.

Im gonna run the stock motor and carb with the dg pipe and no oil pump (premix only). No blinkers or horn but it will have a small tail/brake light and a small round headlight molded in. Might do 2" over swingarm and a motor swap down the line.

It definitely needs
-brake pads
-front fairing mount